|
|||||||||||
PREV CLASS NEXT CLASS | FRAMES NO FRAMES | ||||||||||
SUMMARY: NESTED | FIELD | CONSTR | METHOD | DETAIL: FIELD | CONSTR | METHOD |
java.lang.Objectbyucc.jhdl.base.Nameable
byucc.jhdl.base.Node
byucc.jhdl.base.Cell
byucc.jhdl.base.Structural
byucc.jhdl.Logic.LogicGates
byucc.jhdl.Logic.LogicStatic
byucc.jhdl.Logic.Logic
byucc.jhdl.Xilinx.XilinxCL
byucc.jhdl.Xilinx.Virtex2.bufgs
Each of the BUF*_ANN classes implements an Annotation-only buffer, i.e. with no simulation model. This is to allow the user to set up net constraints that aren't supported natively by JHDL (i.e. clock net setup, etc.). The BUFG cell is a global buffer which distributes high-fanout clock signals throughout the device. For an XC4000 design, you can use a maximum of eight BUFG symbols (assuming that no specific BUFGP or BUFGS buffers are specified). The BUFG is converted to a BUFGP or BUFGS for the XC4000 architecture. The BUFGE is a global buffer that uses the 'early' routes on the device. The BUFGLS cell is a global buffer cell which distributes high-fanout signals throughout the device. The BUFGLS uses low-skew modes on the I/O buffers. The BUFGP is a primary global buffer. The BUFGS is a secondary global buffer. Both cells can drive any of four global vertical routes per column of CLBs. Each one of the four global vertical lines can drive the CLB clock (K) pin directly, and a small subset of the other CLB pins, depending on the type of buffer and the position (refer to the library guide). The JHDL XC4000 libraries model all of these cells as Annotations, meaning that they have no behavioral model. (Source: XACT Libraries Guide, pg. 3-87, Xilinx Corporation, 1994.)
Field Summary | |
static CellInterface[] |
cell_interface
The port interface for: bufgs i : in (1) o : out (1) |
static java.lang.String |
cellname
The static cellname (netlist reference name) for bufgs |
Fields inherited from class byucc.jhdl.Xilinx.XilinxCL |
implicit_interface |
Fields inherited from class byucc.jhdl.Logic.Logic |
ABOVE, ALIGN_BOTTOM, ALIGN_CENTER, ALIGN_LEFT, ALIGN_LSB, ALIGN_MSB, ALIGN_RIGHT, ALIGN_TOP, BELOW, DOWN, EAST_OF, LEFT_OF, MAX_PACK, NORTH_OF, ON, ONTOP, ONTOP_OF, RIGHT_OF, SOUTH_OF, TOLEFT, TORIGHT, UNCONSTRAINED, UP, WEST_OF |
Fields inherited from class byucc.jhdl.Logic.LogicGates |
tech_mapper |
Fields inherited from class byucc.jhdl.base.Cell |
BOOLEAN, CELL_NAME_DECLARATION, CellInterfaceDeterminesUniqueNetlistStructure, DETERMINE_FROM_STRING, GENERICS_DECLARATION, IMPLICIT_INTERFACE_DECLARATION, INTEGER, INTERFACE_DECLARATION, LONG, PORT_IOS_DECLARATION, PORT_NAMES_DECLARATION, PORT_NET_NAMES_DECLARATION, PORT_PROPERTIES, PORT_WIDTHS_DECLARATION, SIGN_EXT, STRING, ZERO_PAD |
Constructor Summary | |
protected |
bufgs(Node parent)
Used only by child classes to pass up the parent cell. |
|
bufgs(Node parent,
ArgBlockList abl)
Constructs a new bufgs, connecting its ports as given by the String-Wire pairs in the ArgBlockList . |
protected |
bufgs(Node parent,
java.lang.String name)
Used only by child classes to pass up the parent cell and instance name. |
|
bufgs(Node parent,
java.lang.String instanceName,
ArgBlockList abl)
Constructs a new bufgs, connecting its ports as given by the String-Wire pairs in the ArgBlockList . |
|
bufgs(Node parent,
java.lang.String instanceName,
java.lang.String s0,
Wire w0,
java.lang.String s1,
Wire w1)
Constructs a new bufgs, connecting each Wire to the port whose name is given by the accompanying String parameter
The initial String parameter specifies the instance name. |
|
bufgs(Node parent,
java.lang.String s0,
Wire w0,
java.lang.String s1,
Wire w1)
Constructs a new bufgs, connecting each Wire to the port whose name is given by the accompanying String parameter |
|
bufgs(Node parent,
java.lang.String instanceName,
Wire i,
Wire o)
Constructs a new bufgs. |
|
bufgs(Node parent,
Wire i,
Wire o)
Constructs a new bufgs. |
Method Summary | |
boolean |
cellInterfaceDeterminesUniqueNetlistStructure()
When false, the default behavior of this method, each cell will list itself separately in a netlist, guaranteeing that the netlist will not have invalid data at the expense of a larger file-size. |
java.lang.String |
getCellName()
Access the cell name associated with a derived class. |
static void |
main(java.lang.String[] argv)
|
void |
propagate()
Users defined propagatable behavior using standard JHDL constructs. |
static void |
test()
|
int |
type()
This method returns one of the predefined schematic constants to identify the type of this cell. |
Methods inherited from class byucc.jhdl.Xilinx.XilinxCL |
connectImplicitPorts |
Methods inherited from class byucc.jhdl.base.Node |
addObservable, addSimulatorCallback, checkAll, delete, getBuildingFlag, getChildren, getChildrenEnumeration, getInstanceName, getParent, getParentCell, getRelatives, getSystem, getWires, optimize, orphanAllowed, printAllChildren, printTree, removeSimulatorCallback, setDefaultClock |
Methods inherited from class byucc.jhdl.base.Nameable |
caseSensitivity, caseSensitivity, disableNameClashChecking, getFullName, getFullNameNoTestBench, getHierNameNoTestBench, getInstanceNo, getInstanceNumber, getLeafName, getLeafName, getRelativeName, getUserName, getUserName, hasUserSpecifiedName, isDescendantOf, setInstanceNumber |
Methods inherited from class java.lang.Object |
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait |
Field Detail |
public static final java.lang.String cellname
public static CellInterface[] cell_interface
Constructor Detail |
protected bufgs(Node parent)
parent
- Parent cellprotected bufgs(Node parent, java.lang.String name)
parent
- Parent cellname
- Instance name of the cellpublic bufgs(Node parent, Wire i, Wire o)
parent
- The parent Cell
to the bufgsi
- The Wire
to be connected to input port io
- The Wire
to be connected to output port opublic bufgs(Node parent, java.lang.String instanceName, Wire i, Wire o)
String
parameter specifies the instance name.
parent
- The parent Cell
to the bufgsinstanceName
- The instance name of the bufgsi
- The Wire
to be connected to input port io
- The Wire
to be connected to output port opublic bufgs(Node parent, java.lang.String s0, Wire w0, java.lang.String s1, Wire w1)
Wire
to the port whose name is given by the accompanying String
parameter
parent
- The parent Cell
to the bufgss0
- The name of the port to which w0 will be connectedw0
- The Wire
to be connected to the port specified by s0s1
- The name of the port to which w1 will be connectedw1
- The Wire
to be connected to the port specified by s1public bufgs(Node parent, java.lang.String instanceName, java.lang.String s0, Wire w0, java.lang.String s1, Wire w1)
Wire
to the port whose name is given by the accompanying String
parameter
The initial String
parameter specifies the instance name.
parent
- The parent Cell
to the bufgsinstanceName
- The instance name of the bufgss0
- The name of the port to which w0 will be connectedw0
- The Wire
to be connected to the port specified by s0s1
- The name of the port to which w1 will be connectedw1
- The Wire
to be connected to the port specified by s1public bufgs(Node parent, ArgBlockList abl)
String-Wire
pairs in the ArgBlockList
. Any generic assignments are made through String-String
pairs in the ArgBlockList
.
parent
- The parent Cell
to the bufgsabl
- The list of String-Wire
pairs for port assignments, and String-String
pairs for generic assignments.public bufgs(Node parent, java.lang.String instanceName, ArgBlockList abl)
String-Wire
pairs in the ArgBlockList
. Any generic assignments are made through String-String
pairs in the ArgBlockList
.
The initial String
parameter is the instance name.
parent
- The parent Cell
to the bufgsinstanceName
- The instance name of the bufgsabl
- The list of String-Wire
pairs for port assignments, and String-String
pairs for generic assignments.Method Detail |
public java.lang.String getCellName()
Cell
getCellName
in class Cell
public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
Cell
cellInterfaceDeterminesUniqueNetlistStructure
in class Cell
public int type()
PreDefinedSchematic
type
in interface PreDefinedSchematic
public final void propagate()
Structural
propagate
in interface byucc.jhdl.base.Propagateable
propagate
in class Structural
public static void main(java.lang.String[] argv)
public static void test()
|
|||||||||||
PREV CLASS NEXT CLASS | FRAMES NO FRAMES | ||||||||||
SUMMARY: NESTED | FIELD | CONSTR | METHOD | DETAIL: FIELD | CONSTR | METHOD |