|
|||||||||||
| PREV CLASS NEXT CLASS | FRAMES NO FRAMES | ||||||||||
| SUMMARY: NESTED | FIELD | CONSTR | METHOD | DETAIL: FIELD | CONSTR | METHOD | ||||||||||
java.lang.Objectbyucc.jhdl.base.Nameable
byucc.jhdl.base.Node
byucc.jhdl.base.Cell
byucc.jhdl.base.Structural
byucc.jhdl.Logic.LogicGates
byucc.jhdl.Logic.LogicStatic
byucc.jhdl.Logic.Logic
byucc.jhdl.Xilinx.XilinxCL
byucc.jhdl.Xilinx.Virtex2.bufgdll
Each of the BUF*_ANN classes implements an Annotation-only buffer, i.e. with no simulation model. This is to allow the user to set up net constraints that aren't supported natively by JHDL (i.e. clock net setup, etc.). The BUFG cell is a global buffer which distributes high-fanout clock signals throughout the device. For an XC4000 design, you can use a maximum of eight BUFG symbols (assuming that no specific BUFGP or BUFGS buffers are specified). The BUFG is converted to a BUFGP or BUFGS for the XC4000 architecture. The BUFGE is a global buffer that uses the 'early' routes on the device. The BUFGLS cell is a global buffer cell which distributes high-fanout signals throughout the device. The BUFGLS uses low-skew modes on the I/O buffers. The BUFGP is a primary global buffer. The BUFGS is a secondary global buffer. Both cells can drive any of four global vertical routes per column of CLBs. Each one of the four global vertical lines can drive the CLB clock (K) pin directly, and a small subset of the other CLB pins, depending on the type of buffer and the position (refer to the library guide). The JHDL XC4000 libraries model all of these cells as Annotations, meaning that they have no behavioral model. (Source: XACT Libraries Guide, pg. 3-87, Xilinx Corporation, 1994.)
| Field Summary | |
static CellInterface[] |
cell_interface
The port interface for: bufgdll i : in (1) o : out (1) |
static java.lang.String |
cellname
The static cellname (netlist reference name) for bufgdll |
| Fields inherited from class byucc.jhdl.Xilinx.XilinxCL |
implicit_interface |
| Fields inherited from class byucc.jhdl.Logic.Logic |
ABOVE, ALIGN_BOTTOM, ALIGN_CENTER, ALIGN_LEFT, ALIGN_LSB, ALIGN_MSB, ALIGN_RIGHT, ALIGN_TOP, BELOW, DOWN, EAST_OF, LEFT_OF, MAX_PACK, NORTH_OF, ON, ONTOP, ONTOP_OF, RIGHT_OF, SOUTH_OF, TOLEFT, TORIGHT, UNCONSTRAINED, UP, WEST_OF |
| Fields inherited from class byucc.jhdl.Logic.LogicGates |
tech_mapper |
| Fields inherited from class byucc.jhdl.base.Cell |
BOOLEAN, CELL_NAME_DECLARATION, CellInterfaceDeterminesUniqueNetlistStructure, DETERMINE_FROM_STRING, GENERICS_DECLARATION, IMPLICIT_INTERFACE_DECLARATION, INTEGER, INTERFACE_DECLARATION, LONG, PORT_IOS_DECLARATION, PORT_NAMES_DECLARATION, PORT_NET_NAMES_DECLARATION, PORT_PROPERTIES, PORT_WIDTHS_DECLARATION, SIGN_EXT, STRING, ZERO_PAD |
| Constructor Summary | |
protected |
bufgdll(Node parent)
Used only by child classes to pass up the parent cell. |
|
bufgdll(Node parent,
ArgBlockList abl)
Constructs a new bufgdll, connecting its ports as given by the String-Wire pairs in the ArgBlockList. |
protected |
bufgdll(Node parent,
java.lang.String name)
Used only by child classes to pass up the parent cell and instance name. |
|
bufgdll(Node parent,
java.lang.String instanceName,
ArgBlockList abl)
Constructs a new bufgdll, connecting its ports as given by the String-Wire pairs in the ArgBlockList. |
|
bufgdll(Node parent,
java.lang.String instanceName,
java.lang.String s0,
Wire w0,
java.lang.String s1,
Wire w1)
Constructs a new bufgdll, connecting each Wire to the port whose name is given by the accompanying String parameter
The initial String parameter specifies the instance name. |
|
bufgdll(Node parent,
java.lang.String s0,
Wire w0,
java.lang.String s1,
Wire w1)
Constructs a new bufgdll, connecting each Wire to the port whose name is given by the accompanying String parameter |
|
bufgdll(Node parent,
java.lang.String instanceName,
Wire i,
Wire o)
Constructs a new bufgdll. |
|
bufgdll(Node parent,
Wire i,
Wire o)
Constructs a new bufgdll. |
| Method Summary | |
boolean |
cellInterfaceDeterminesUniqueNetlistStructure()
When false, the default behavior of this method, each cell will list itself separately in a netlist, guaranteeing that the netlist will not have invalid data at the expense of a larger file-size. |
java.lang.String |
getCellName()
Access the cell name associated with a derived class. |
static void |
main(java.lang.String[] argv)
|
void |
propagate()
Users defined propagatable behavior using standard JHDL constructs. |
static void |
test()
|
int |
type()
This method returns one of the predefined schematic constants to identify the type of this cell. |
| Methods inherited from class byucc.jhdl.Xilinx.XilinxCL |
connectImplicitPorts |
| Methods inherited from class byucc.jhdl.base.Node |
addObservable, addSimulatorCallback, checkAll, delete, getBuildingFlag, getChildren, getChildrenEnumeration, getInstanceName, getParent, getParentCell, getRelatives, getSystem, getWires, optimize, orphanAllowed, printAllChildren, printTree, removeSimulatorCallback, setDefaultClock |
| Methods inherited from class byucc.jhdl.base.Nameable |
caseSensitivity, caseSensitivity, disableNameClashChecking, getFullName, getFullNameNoTestBench, getHierNameNoTestBench, getInstanceNo, getInstanceNumber, getLeafName, getLeafName, getRelativeName, getUserName, getUserName, hasUserSpecifiedName, isDescendantOf, setInstanceNumber |
| Methods inherited from class java.lang.Object |
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait |
| Field Detail |
public static final java.lang.String cellname
public static CellInterface[] cell_interface
| Constructor Detail |
protected bufgdll(Node parent)
parent - Parent cell
protected bufgdll(Node parent,
java.lang.String name)
parent - Parent cellname - Instance name of the cell
public bufgdll(Node parent,
Wire i,
Wire o)
parent - The parent Cell to the bufgdlli - The Wire to be connected to input port io - The Wire to be connected to output port o
public bufgdll(Node parent,
java.lang.String instanceName,
Wire i,
Wire o)
String parameter specifies the instance name.
parent - The parent Cell to the bufgdllinstanceName - The instance name of the bufgdlli - The Wire to be connected to input port io - The Wire to be connected to output port o
public bufgdll(Node parent,
java.lang.String s0,
Wire w0,
java.lang.String s1,
Wire w1)
Wire to the port whose name is given by the accompanying String parameter
parent - The parent Cell to the bufgdlls0 - The name of the port to which w0 will be connectedw0 - The Wire to be connected to the port specified by s0s1 - The name of the port to which w1 will be connectedw1 - The Wire to be connected to the port specified by s1
public bufgdll(Node parent,
java.lang.String instanceName,
java.lang.String s0,
Wire w0,
java.lang.String s1,
Wire w1)
Wire to the port whose name is given by the accompanying String parameter
The initial String parameter specifies the instance name.
parent - The parent Cell to the bufgdllinstanceName - The instance name of the bufgdlls0 - The name of the port to which w0 will be connectedw0 - The Wire to be connected to the port specified by s0s1 - The name of the port to which w1 will be connectedw1 - The Wire to be connected to the port specified by s1
public bufgdll(Node parent,
ArgBlockList abl)
String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.
parent - The parent Cell to the bufgdllabl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.
public bufgdll(Node parent,
java.lang.String instanceName,
ArgBlockList abl)
String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.
The initial String parameter is the instance name.
parent - The parent Cell to the bufgdllinstanceName - The instance name of the bufgdllabl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.| Method Detail |
public java.lang.String getCellName()
Cell
getCellName in class Cellpublic final boolean cellInterfaceDeterminesUniqueNetlistStructure()
Cell
cellInterfaceDeterminesUniqueNetlistStructure in class Cellpublic int type()
PreDefinedSchematic
type in interface PreDefinedSchematicpublic final void propagate()
Structural
propagate in interface byucc.jhdl.base.Propagateablepropagate in class Structuralpublic static void main(java.lang.String[] argv)
public static void test()
|
|||||||||||
| PREV CLASS NEXT CLASS | FRAMES NO FRAMES | ||||||||||
| SUMMARY: NESTED | FIELD | CONSTR | METHOD | DETAIL: FIELD | CONSTR | METHOD | ||||||||||